383 lines
18 KiB
Plaintext
383 lines
18 KiB
Plaintext
RE245cb2 !Short name
|
|
22410-44-2 !CAS number
|
|
Methyl-pentafluoroethyl-ether !Full name (also pentafluoromethoxyethane)
|
|
CF3CF2OCH3 !Chemical formula {C3H3F5O}
|
|
HFE-245cb2 !Synonym [R245cbE(beta)(gamma)]
|
|
150.047336 !Molar mass [g/mol]
|
|
250. !Triple point temperature [K] (unknown)
|
|
278.76 !Normal boiling point [K]
|
|
406.813 !Critical temperature [K]
|
|
2886.4 !Critical pressure [kPa]
|
|
3.329 !Critical density [mol/L]
|
|
0.354 !Acentric factor
|
|
2.785 !Dipole moment [Debye]; DIPPR DIADEM 2012
|
|
IIR !Default reference state
|
|
10.0 !Version number
|
|
???? !UN Number :UN:
|
|
halocb !Family :Family:
|
|
???? !Heating value (upper) [kJ/mol] :Heat:
|
|
1S/C3H3F5O/c1-9-3(7,8)2(4,5)6/h1H3 !Standard InChI String :InChi:
|
|
GCDWNCOAODIANN-UHFFFAOYSA-N !Standard InChI Key :InChiKey:
|
|
???? !Alternative fluid for mixing rules :AltID:
|
|
82e9e4f0 !Hash number from InChI Key :Hash:
|
|
|
|
|
|
|
|
|
|
!The fluid files contain general information about the fluid in the first 15 to 20 lines, followed by sections for the
|
|
! equations of state, transport equations, and auxiliary equations. Equations of state are listed first. The NIST recommended
|
|
! equations begin with a hash mark (#). The secondary equations begin with the @ symbol. These symbols can be swapped to
|
|
! select a secondary equation as primary and the primary as secondary. The equation of state section also contains auxiliary
|
|
! equations for the ideal gas heat capacity or ideal gas Helmholtz energy. Below the equations of state (both primary and
|
|
! secondary) are the transport equations, first viscosity and then thermal conductivity. These are then followed by the
|
|
! secondary equations if available. The transport section also contains auxiliary equations required to calculate either the
|
|
! dilute gas state or the critical enhancement. At the end of the file are additional but not necessary auxiliary equations,
|
|
! including simple equations for the vapor pressure, saturated liquid and vapor densities, melting line (for some fluids), and
|
|
! sublimation line (for even fewer fluids). This section also contains the equations for dielectric constant and surface
|
|
! tension if available. The sections are divided by different symbols (these being _-+=^*~) to aid the eye in locating a
|
|
! particular section. Secondary equations are indented 10 spaces to avoid confusion with the NIST recommended equations. The
|
|
! end of the fluid file is marked with @END. Anything below that is ignored.
|
|
|
|
|
|
! compiled by E.W. Lemmon, NIST Physical and Chemical Properties Division, Boulder, Colorado
|
|
! 11-20-10 YZ, Original version.
|
|
! 12-02-10 MLH, Add ECS transport.
|
|
! 04-01-13 SH, Add ancillary equations.
|
|
! 04-06-13 EWL, Add dipole moment.
|
|
! 04-17-14 EWL, Add surface tension coefficients of Mulero et al. (2014).
|
|
! 11-15-17 MLH, Revise critical enhancement parameters.
|
|
|
|
|
|
|
|
|
|
________________________________________________________________________________
|
|
|
|
#EOS !---Equation of state---
|
|
FEQ !Helmholtz equation of state for R-E245cbE of Zhou and Lemmon (2018).
|
|
:TRUECRITICALPOINT: 406.813 3.329 !True EOS critical point [K, mol/L] (where dP/dD=0 and d^2P/dD^2=0 at constant T)
|
|
:DOI:
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Zhou, Y. and Lemmon, E.W.,
|
|
?Equations of State for RE245cb2, RE347mcc, RE245fa2, and R1216
|
|
? to be submitted to J. Phys. Chem. Ref. Data, 2018.
|
|
?
|
|
?The uncertainties in density of the equation of state range from 0.2 % in the
|
|
? compressed liquid region to 1.0 % in the critical and vapor regions. The
|
|
? uncertainties in vapor pressure are below 0.5 % at higher temperature, and
|
|
? increase substantially at lower temperature due to a lack of experimental data.
|
|
? In the critical region, the uncertainties are higher for all properties except
|
|
? vapor pressure.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
250. !Lower temperature limit [K]
|
|
500.0 !Upper temperature limit [K]
|
|
20000.0 !Upper pressure limit [kPa]
|
|
9.331 !Maximum density [mol/L]
|
|
CPP !Pointer to Cp0 model
|
|
150.047336 !Molar mass [g/mol]
|
|
250. !Triple point temperature [K]
|
|
27.67 !Pressure at triple point [kPa]
|
|
9.33 !Density at triple point [mol/L]
|
|
278.76 !Normal boiling point temperature [K]
|
|
0.354 !Acentric factor
|
|
406.813 2886.4 3.329 !Tc [K], pc [kPa], rhoc [mol/L]
|
|
406.813 3.329 !Reducing parameters [K, mol/L]
|
|
8.314472 !Gas constant [J/mol-K]
|
|
10 4 4 12 0 0 0 0 0 0 0 0 !# terms and # coefs/term for normal terms, Gaussian terms, and Gao terms
|
|
0.041453162 1.0 4. 0. !a(i),t(i),d(i),l(i)
|
|
1.5010352 0.25 1. 0.
|
|
-2.3142144 0.786 1. 0.
|
|
-0.471412 1.32 2. 0.
|
|
0.17182 0.338 3. 0.
|
|
-0.98793 2.82 1. 2.
|
|
-0.392049 2.0 3. 2.
|
|
0.68485830 1.0 2. 1.
|
|
-0.32413816 3.0 2. 2.
|
|
-0.02414796 0.766 7. 1.
|
|
0.82792487 1.75 1. 2. 2. -1.023 -1.727 1.10 0.713 0. 0. 0.
|
|
-0.31833343 3.5 1. 2. 2. -1.384 -1.543 0.64 0.917 0. 0. 0.
|
|
-0.11929747 3.86 3. 2. 2. -0.998 -1.075 0.50 0.690 0. 0. 0.
|
|
-0.65010212 2.75 3. 2. 2. -6.9 -88.0 1.26 0.743 0. 0. 0.
|
|
eta beta gamma epsilon
|
|
EXP[eta*(delta-epsilon)^2+beta*(tau-gamma)^2]
|
|
|
|
|
|
#AUX !---Auxiliary function for Cp0
|
|
CPP !Ideal gas heat capacity function for R-E245cbE of Zhou et al. (2010).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Zhou, Y. and Lemmon, E.W., 2018.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
1.0 8.314472 !Reducing parameters for T, Cp0
|
|
1 3 0 0 0 0 0 !Nterms: polynomial, exponential, cosh, sinh
|
|
10.196438 0.0
|
|
10.214789 814.0
|
|
10.503071 2031.0
|
|
0.98682562 3040.0
|
|
|
|
|
|
#AUX !---Auxiliary function for PX0
|
|
PX0 !Helmholtz energy ideal-gas function for R-E245cbE of Zhou et al. (2010).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Zhou, Y. and Lemmon, E.W., 2018.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
1 2 3 0 0 0 0 0 !Nterms: ai*log(tau**ti); ai*tau**ti; ai*log(1-exp(bi*tau))
|
|
9.196438 1.0 !ai, ti for [ai*log(tau**ti)] terms
|
|
-16.6899126785229228 0.0 !aj, ti for [ai*tau**ti] terms
|
|
8.2686888614374467 1.0 !aj, ti for [ai*tau**ti] terms
|
|
10.214789 814.0 !aj, ti for [ai*log(1-exp(-ti/T)] terms
|
|
10.503071 2031.0
|
|
0.98682562 3040.0
|
|
|
|
|
|
|
|
|
|
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
|
#TRN !---ECS Transport---
|
|
ECS !Extended Corresponding States model (R134a reference); fit to limited data for R-E245cb2.
|
|
:DOI: 10.6028/NIST.IR.8209
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Huber, M.L., "Models for the Viscosity, Thermal Conductivity, and Surface Tension
|
|
? of Selected Pure Fluids as Implemented in REFPROP v10.0," NISTIR 8209, 2018.
|
|
? doi: 10.6028/NIST.IR.8209
|
|
?
|
|
?VISCOSITY
|
|
? Matsuo, S., Tanaka, Y., Sotani, T., "Experimental Study on the Transport Properties of Fluorinated Ethers," Fluid Phase Equilib., 2002:194-197, 1205-1213. doi: 10.1016/S0378-3812(01)00793-2
|
|
?
|
|
?Estimated uncertainty in liquid phase over 298- 348 K approximately 3%,
|
|
? Gas phase data unavailable, estimated uncertainty 10% in gas phase.
|
|
?
|
|
?THERMAL CONDUCTIVITY
|
|
? Matsuo, S., Tanaka, Y., Sotani, T., "Experimental Study on the Transport Properties of Fluorinated Ethers," Fluid Phase Equilib., 194-197:1205-1213, 2002. doi: 10.1016/S0378-3812(01)00793-2
|
|
?
|
|
?Estimated uncertainty approximately 3-5%, except near the critical point.
|
|
?
|
|
?The Lennard-Jones parameters were estimated with the method of Chung.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
250.0 !Lower temperature limit [K]
|
|
500.0 !Upper temperature limit [K]
|
|
20000.0 !Upper pressure limit [kPa]
|
|
9.331 !Maximum density [mol/L]
|
|
FEQ R134A.FLD
|
|
VS1 !Model for reference fluid viscosity
|
|
TC1 !Model for reference fluid thermal conductivity
|
|
NUL !Large molecule identifier
|
|
1 !Lennard-Jones flag (0 or 1) (0 => use estimates)
|
|
0.5418 !Lennard-Jones coefficient sigma [nm] from method Chung
|
|
323.05 !Lennard-Jones coefficient epsilon/kappa [K] from Chung method
|
|
1 0 0 !Number of terms in f_int term in Eucken correlation, spare1, spare2
|
|
0.001129 0. 0. 0. !Coefficient, power of T, spare1, spare2
|
|
2 0 0 !Number of terms in psi (visc shape factor): poly,spare1,spare2
|
|
1.0692 0. 0. 0. !Coefficient, power of Tr, power of Dr, spare
|
|
-0.023595 0. 1. 0. !Coefficient, power of Tr, power of Dr, spare
|
|
2 0 0 !Number of terms in chi (t.c. shape factor): poly,spare1,spare2
|
|
0.96324 0. 0. 0. !Coefficient, power of Tr, power of Dr, spare
|
|
0.027265 0. 1. 0. !Coefficient, power of Tr, power of Dr, spare
|
|
TK3 !Pointer to critical enhancement auxiliary function
|
|
|
|
|
|
#AUX !---Auxiliary function for the thermal conductivity critical enhancement
|
|
TK3 !Simplified thermal conductivity critical enhancement for R-E245cb2 of Perkins et al. (2013).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Perkins, R.A., Sengers, J.V., Abdulagatov, I.M., and Huber, M.L.,
|
|
? "Simplified Model for the Critical Thermal-Conductivity Enhancement in Molecular Fluids,"
|
|
? Int. J. Thermophys., 34(2):191-212, 2013. doi: 10.1007/s10765-013-1409-z
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
9 0 0 0 !# terms: CO2-terms, spare, spare, spare
|
|
1.0 1.0 1.0 !Reducing parameters for T, rho, tcx [mW/(m-K)]
|
|
0.63 !Nu (universal exponent)
|
|
1.239 !Gamma (universal exponent)
|
|
1.02 !R0 (universal amplitude)
|
|
0.063 !Z (universal exponent--not used for t.c., only viscosity)
|
|
1.0 !C (constant in viscosity eqn = 1/[2 - (alpha + gamma)/(2*nu)], but often set to 1)
|
|
0.217e-9 !Xi0 (amplitude) [m]
|
|
0.057 !Gam0 (amplitude) [-]
|
|
0.660e-9 !Qd_inverse (modified effective cutoff parameter) [m]; R125 value
|
|
610.2 !Tref (reference temperature)=1.5*Tc [K]
|
|
|
|
|
|
|
|
|
|
********************************************************************************
|
|
|
|
@ETA !---Viscosity---
|
|
VS5 !Pure fluid viscosity model for R-E245cb2 of Chung et al. (1988).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Chung, T-H., Ajlan, M., Lee, L.L. and Starling, K.E.
|
|
? "Generalized Multiparameter Correlation for Nonpolar and Polar Fluid Transport Properties"
|
|
? Ind. Eng. Chem. Res. 1998, 27, 671-679.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
250.0 !Lower temperature limit [K]
|
|
500.0 !Upper temperature limit [K]
|
|
20000.0 !Upper pressure limit [kPa]
|
|
9.331 !Maximum density [mol/L]
|
|
1 !Number of terms associated with dilute-gas function
|
|
NUL !Pointer to reduced effective collision cross-section model; not used
|
|
0.5418 !Lennard-Jones coefficient sigma [nm] =0.809vc*(1/3)A
|
|
323.05 !Lennard-Jones coefficient epsilon/kappa [K] =Tc/1.2593
|
|
1.0 1.0 !Reducing parameters for T, eta
|
|
0.26161 0.5 !=0.021357*SQRT(MW) [Chapman-Enskog term]
|
|
0 !Number of terms for initial density dependence
|
|
0.354 0.0 0.0 0. 0 !w, mur, kappa for Chung
|
|
0 !Additional parameters for Chung
|
|
NUL !Pointer to the viscosity critical enhancement auxiliary function (none used)
|
|
|
|
|
|
@TCX !---Thermal conductivity---
|
|
TC5 !Pure fluid thermal conductivity model for R-E245cb2 of Chung et al. (1988).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Chung, T-H., Ajlan, M., Lee, L.L. and Starling, K.E.
|
|
? "Generalized Multiparameter Correlation for Nonpolar and Polar Fluid Transport Properties"
|
|
? Ind. Eng. Chem. Res. 1998, 27, 671-679.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
250. !Lower temperature limit [K]
|
|
500.0 !Upper temperature limit [K]
|
|
20000.0 !Upper pressure limit [kPa]
|
|
9.331 !Maximum density [mol/L]
|
|
0.5418 !Lennard-Jones coefficient sigma [nm] =0.809vc*(1/3)A
|
|
323.05 !Lennard-Jones coefficient epsilon/kappa [K] =Tc/1.2593
|
|
0.354 0. 0. !w, mur, kappa for Chung
|
|
0 !Additional parameters for Chung
|
|
TK3 !Pointer to critical enhancement auxiliary function
|
|
|
|
|
|
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
#STN !---Surface tension---
|
|
ST1 !Surface tension model for R-E245cb2 of Mulero et al. (2014).
|
|
:DOI: 10.1063/1.4878755
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Mulero, A. and Cachadiña, I.,
|
|
? "Recommended Correlations for the Surface Tension of Several Fluids
|
|
? Included in the REFPROP Program,"
|
|
? J. Phys. Chem. Ref. Data, 43, 023104, 2014.
|
|
? doi: 10.1063/1.4878755
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
1 !Number of terms in surface tension model
|
|
406.813 !Critical temperature used in fit (dummy)
|
|
0.04534 1.237 !Sigma0 and n
|
|
|
|
|
|
#PS !---Vapor pressure---
|
|
PS5 !Vapor pressure equation for R-E245cb2 of Herrig (2013).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Herrig, S., 2013.
|
|
?
|
|
?Functional Form: P=Pc*EXP[SUM(Ni*Theta^ti)*Tc/T] where Theta=1-T/Tc, Tc and Pc
|
|
? are the reducing parameters below, which are followed by rows containing Ni and ti.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
406.813 2886.4 !Reducing parameters
|
|
4 0 0 0 0 0 !Number of terms in equation
|
|
-7.8026 1.0
|
|
1.8804 1.5
|
|
-2.8375 2.5
|
|
-4.3077 5.0
|
|
|
|
|
|
#DL !---Saturated liquid density---
|
|
DL1 !Saturated liquid density equation for R-E245cb2 of Herrig (2013).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Herrig, S., 2013.
|
|
?
|
|
?Functional Form: D=Dc*[1+SUM(Ni*Theta^ti)] where Theta=1-T/Tc, Tc and Dc are
|
|
? the reducing parameters below, which are followed by rows containing Ni and ti.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
406.818 3.329 !Reducing parameters
|
|
6 0 0 0 0 0 !Number of terms in equation
|
|
1.8378 0.32
|
|
2.5311 1.08
|
|
-7.0840 1.90
|
|
18.678 2.80
|
|
-30.228 3.80
|
|
22.985 4.90
|
|
|
|
|
|
#DV !---Saturated vapor density---
|
|
DV3 !Saturated vapor density equation for R-E245cb2 of Herrig (2013).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Herrig, S., 2013.
|
|
?
|
|
?Functional Form: D=Dc*EXP[SUM(Ni*Theta^ti)] where Theta=1-T/Tc, Tc and Dc are
|
|
? the reducing parameters below, which are followed by rows containing Ni and ti.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
406.813 3.329 !Reducing parameters
|
|
5 0 0 0 0 0 !Number of terms in equation
|
|
-1.5224 0.286
|
|
-5.7245 0.820
|
|
-15.972 2.5
|
|
-50.473 5.6
|
|
-6.8916 7.3
|
|
|
|
|
|
@END
|
|
c 1 2 3 4 5 6 7 8
|
|
c2345678901234567890123456789012345678901234567890123456789012345678901234567890
|
|
|
|
@TCX !Thermal conductivity model specification
|
|
TC5 pure fluid thermal conductivity model of Chung et al. (1988).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Chung, T-H., Ajlan, M., Lee, L.L. and Starling, K.E.
|
|
? "Generalized Multiparameter Correlation for Nonpolar and Polar Fluid Transport Properties"
|
|
? Ind. Eng. Chem. Res. 1998, 27, 671-679.
|
|
?
|
|
?
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
225.68 !Lower temperature limit [K]
|
|
1000. !Upper temperature limit [K]
|
|
50000. !Upper pressure limit [kPa]
|
|
10. !Maximum density [mol/L]
|
|
0.87 !Lennard-Jones coefficient sigma [nm] =0.809vc*(1/3)A
|
|
621.0 !Lennard-Jones coefficient epsilon/kappa [K] =Tc/1.2593
|
|
0.91 0. 0. !w, mur, kappa for Chung
|
|
0 !Additional parameters for Chung
|
|
TK3 !Pointer to critical enhancement auxiliary function
|