312 lines
14 KiB
Plaintext
312 lines
14 KiB
Plaintext
trans-Butene !Short name
|
|
624-64-6 !CAS number
|
|
trans-2-Butene !Full name
|
|
CH3-CH=CH-CH3 !Chemical formula {C4H8}
|
|
(E)-2-Butene !Synonym
|
|
56.10632 !Molar mass [g/mol]
|
|
167.6 !Triple point temperature [K]
|
|
274.03 !Normal boiling point [K]
|
|
428.61 !Critical temperature [K]
|
|
4027.3 !Critical pressure [kPa]
|
|
4.213 !Critical density [mol/L]
|
|
0.21 !Acentric factor
|
|
0.0 !Dipole moment [Debye]; (exactly zero due to symmetry) Watson, H.E. and K.L. Ramaswamy, Proc. Roy. Soc. (London), A156, 130-137 (1936).
|
|
NBP !Default reference state
|
|
10.0 !Version number
|
|
1012 !UN Number :UN:
|
|
n-alkene !Family :Family:
|
|
2706.4 !Heating value (upper) [kJ/mol] :Heat:
|
|
1S/C4H8/c1-3-4-2/h3-4H,1-2H3/b4-3+ !Standard InChI String :InChi:
|
|
IAQRGUVFOMOMEM-ONEGZZNKSA-N !Standard InChI Key :InChiKey:
|
|
7b3b4080 (butane) !Alternative fluid for mixing rules :AltID:
|
|
b28337f0 !Hash number from InChI Key :Hash:
|
|
|
|
|
|
|
|
|
|
!The fluid files contain general information about the fluid in the first 15 to 20 lines, followed by sections for the
|
|
! equations of state, transport equations, and auxiliary equations. Equations of state are listed first. The NIST recommended
|
|
! equations begin with a hash mark (#). The secondary equations begin with the @ symbol. These symbols can be swapped to
|
|
! select a secondary equation as primary and the primary as secondary. The equation of state section also contains auxiliary
|
|
! equations for the ideal gas heat capacity or ideal gas Helmholtz energy. Below the equations of state (both primary and
|
|
! secondary) are the transport equations, first viscosity and then thermal conductivity. These are then followed by the
|
|
! secondary equations if available. The transport section also contains auxiliary equations required to calculate either the
|
|
! dilute gas state or the critical enhancement. At the end of the file are additional but not necessary auxiliary equations,
|
|
! including simple equations for the vapor pressure, saturated liquid and vapor densities, melting line (for some fluids), and
|
|
! sublimation line (for even fewer fluids). This section also contains the equations for dielectric constant and surface
|
|
! tension if available. The sections are divided by different symbols (these being _-+=^*~) to aid the eye in locating a
|
|
! particular section. Secondary equations are indented 10 spaces to avoid confusion with the NIST recommended equations. The
|
|
! end of the fluid file is marked with @END. Anything below that is ignored.
|
|
|
|
|
|
! compiled by E.W. Lemmon, NIST Physical and Chemical Properties Division, Boulder, Colorado
|
|
! 12-17-03 EWL, Original version.
|
|
! 10-14-04 MLH, Add family.
|
|
! 11-13-06 MLH, Add LJ parameters.
|
|
! 08-17-10 IDC, Add ancillary equations.
|
|
! 04-17-14 EWL, Add surface tension coefficients of Mulero et al. (2014).
|
|
! 05-04-16 MLH, Add viscosity and thermal conductivity estimates.
|
|
|
|
|
|
|
|
|
|
________________________________________________________________________________
|
|
|
|
#EOS !---Equation of state---
|
|
FEQ !Helmholtz equation of state for trans-butene of Lemmon and Ihmels (2005).
|
|
:TRUECRITICALPOINT: 428.61 4.213 !True EOS critical point [K, mol/L] (where dP/dD=0 and d^2P/dD^2=0 at constant T)
|
|
:DOI: 10.1016/j.fluid.2004.09.004
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Lemmon, E.W. and Ihmels, E.C.,
|
|
? "Thermodynamic Properties of the Butenes. Part II. Short Fundamental
|
|
? Equations of State,"
|
|
? Fluid Phase Equilib., 228-229C:173-187, 2005.
|
|
?
|
|
?The uncertainties in densities calculated with the equation of state
|
|
? are 0.1% in the liquid phase at temperatures above 270 K (rising to
|
|
? 0.5% at temperatures below 200 K), 0.2% at temperatures above the
|
|
? critical temperature and at pressures above 10 MPa, and 0.5% in the
|
|
? vapor phase, including supercritical conditions below 10 MPa. The
|
|
? uncertainty in the vapor phase may be higher than 0.5% in some regions.
|
|
? The uncertainty in vapor pressure is 0.3% above 200 K, and the
|
|
? uncertainty in heat capacities is 0.5% at saturated liquid conditions,
|
|
? rising to 5% at much higher pressures and at temperatures above 250 K.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
167.6 !Lower temperature limit [K]
|
|
525. !Upper temperature limit [K]
|
|
50000. !Upper pressure limit [kPa]
|
|
13.141 !Maximum density [mol/L]
|
|
CPP !Pointer to Cp0 model
|
|
56.10632 !Molar mass [g/mol]
|
|
167.6 !Triple point temperature [K]
|
|
0.07481 !Pressure at triple point [kPa]
|
|
13.14 !Density at triple point [mol/L]
|
|
274.03 !Normal boiling point temperature [K]
|
|
0.21 !Acentric factor
|
|
428.61 4027.3 4.213 !Tc [K], pc [kPa], rhoc [mol/L]
|
|
428.61 4.213 !Reducing parameters [K, mol/L]
|
|
8.314472 !Gas constant [J/mol-K]
|
|
12 4 0 0 0 0 0 0 0 0 0 0 !# terms and # coefs/term for normal terms, Gaussian terms, and Gao terms
|
|
0.81107 0.12 1. 0. !a(i),t(i),d(i),l(i)
|
|
-2.8846 1.3 1. 0.
|
|
1.0265 1.74 1. 0.
|
|
0.016591 2.1 2. 0.
|
|
0.086511 0.28 3. 0.
|
|
0.00023256 0.69 7. 0.
|
|
0.22654 0.75 2. 1.
|
|
-0.072182 2.0 5. 1.
|
|
-0.24849 4.4 1. 2.
|
|
-0.071374 4.7 4. 2.
|
|
-0.024737 15.0 3. 3.
|
|
0.011843 14.0 4. 3.
|
|
|
|
|
|
#AUX !---Auxiliary function for Cp0
|
|
CPP !Ideal gas heat capacity function for trans-butene of Lemmon and Ihmels (2005).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Lemmon, E.W. and Ihmels, E.C., 2015.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
1.0 8.314472 !Reducing parameters for T, Cp0
|
|
1 4 0 0 0 0 0 !Nterms: polynomial, exponential, cosh, sinh
|
|
3.9988 0.0
|
|
5.3276 362.0
|
|
13.29 1603.0
|
|
9.6745 3729.0
|
|
0.40087 4527.0
|
|
|
|
|
|
#AUX !---Auxiliary function for PX0
|
|
PX0 !Helmholtz energy ideal-gas function for trans-butene of Lemmon and Ihmels (2005).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Lemmon, E.W. and Ihmels, E.C., 2015.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
1 2 4 0 0 0 0 0 !Nterms: ai*log(tau**ti); ai*tau**ti; ai*log(1-exp(bi*tau))
|
|
2.9988 1.0 !ai, ti for [ai*log(tau**ti)] terms
|
|
0.5917836623979218 0.0 !aj, ti for [ai*tau**ti] terms
|
|
2.1427744975995116 1.0 !aj, ti for [ai*tau**ti] terms
|
|
5.3276 362.0 !aj, ti for [ai*log(1-exp(-ti/T)] terms
|
|
13.29 1603.0
|
|
9.6745 3729.0
|
|
0.40087 4527.0
|
|
|
|
|
|
|
|
|
|
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|
|
#TRN !---ECS Transport---
|
|
ECS !Extended Corresponding States model (Propane reference); predictive mode for trans-butene.
|
|
:DOI: 10.6028/NIST.IR.8209
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?*** ESTIMATION METHOD *** NOT STANDARD REFERENCE QUALITY ***
|
|
?Huber, M.L., "Models for the Viscosity, Thermal Conductivity, and Surface Tension
|
|
? of Selected Pure Fluids as Implemented in REFPROP v10.0," NISTIR 8209, 2018.
|
|
? doi: 10.6028/NIST.IR.8209
|
|
?
|
|
?Estimated uncertainty 5% for gas phase; 20% for viscosity and thermal conductivity of liquid phase.
|
|
? Liquid phase data unavailable.
|
|
?
|
|
?The Lennard-Jones parameters were estimated from Hirschfelder, J.O., Curtiss, C.F., and Bird, R.B., "Molecular Theory of Gases and Liquids," John Wiley and Sons, Inc., New York, 1245 pp, 1954. doi: 10.1002/pol.1955.120178311
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
167.6 !Lower temperature limit [K]
|
|
525.0 !Upper temperature limit [K]
|
|
50000.0 !Upper pressure limit [kPa]
|
|
13.141 !Maximum density [mol/L]
|
|
FEQ PROPANE.FLD
|
|
VS1 !Model for reference fluid viscosity
|
|
TC1 !Model for reference fluid thermal conductivity
|
|
NUL !Large molecule identifier
|
|
1 !Lennard-Jones flag (0 or 1) (0 => use estimates)
|
|
0.5508 !Lennard-Jones coefficient sigma [nm]
|
|
259.0 !Lennard-Jones coefficient epsilon/kappa [K]
|
|
2 0 0 !Number of terms in f_int term in Eucken correlation, spare1, spare2
|
|
0.00102143 0. 0. 0. !Coefficient, power of T, spare1, spare2 coeff from isobutene
|
|
6.64409e-7 1. 0. 0. !Coefficient, power of T, spare1, spare2
|
|
3 0 0 !Number of terms in psi (visc shape factor): poly,spare1,spare2
|
|
1.12449 0. 0. 0. !Coefficient, power of Tr, power of Dr, spare; coeff from isobutene
|
|
-0.147034 0. 1. 0. !Coefficient, power of Tr, power of Dr, spare
|
|
0.036655 0. 2. 0. !Coefficient, power of Tr, power of Dr, spare
|
|
2 0 0 !Number of terms in chi (t.c. shape factor): poly,spare1,spare2
|
|
0.838527 0. 0. 0. !Coefficient, power of Tr, power of Dr, spare; coeff from isobutene
|
|
0.0648013 0. 1. 0. !Coefficient, power of Tr, power of Dr, spare
|
|
TK3 !Pointer to critical enhancement auxiliary function
|
|
|
|
|
|
#AUX !---Auxiliary function for the thermal conductivity critical enhancement
|
|
TK3 !Simplified thermal conductivity critical enhancement for trans-butene of Perkins et al. (2013).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Perkins, R.A., Sengers, J.V., Abdulagatov, I.M., and Huber, M.L.,
|
|
? "Simplified Model for the Critical Thermal-Conductivity Enhancement in Molecular Fluids,"
|
|
? Int. J. Thermophys., 34(2):191-212, 2013. doi: 10.1007/s10765-013-1409-z
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
9 0 0 0 !# terms: CO2-terms, spare, spare, spare
|
|
1.0 1.0 1.0 !Reducing parameters for T, rho, tcx [mW/(m-K)]
|
|
0.63 !Nu (universal exponent)
|
|
1.239 !Gamma (universal exponent)
|
|
1.02 !R0 (universal amplitude)
|
|
0.063 !Z (universal exponent--not used for t.c., only viscosity)
|
|
1.0 !C (constant in viscosity eqn = 1/[2 - (alpha + gamma)/(2*nu)], but often set to 1)
|
|
0.21e-9 !Xi0 (amplitude) [m]
|
|
0.057 !Gam0 (amplitude) [-]
|
|
0.609e-9 !Qd_inverse (modified effective cutoff parameter) [m]
|
|
642.92 !Tref (reference temperature)=1.5*Tc [K]
|
|
|
|
|
|
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
#STN !---Surface tension---
|
|
ST1 !Surface tension model for trans-butene of Mulero et al. (2014).
|
|
:DOI: 10.1063/1.4878755
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Mulero, A. and Cachadiña, I.,
|
|
? "Recommended Correlations for the Surface Tension of Several Fluids
|
|
? Included in the REFPROP Program,"
|
|
? J. Phys. Chem. Ref. Data, 43, 023104, 2014.
|
|
? doi: 10.1063/1.4878755
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
2 !Number of terms in surface tension model
|
|
428.61 !Critical temperature used in fit (dummy)
|
|
0.0001859 0.07485 !Sigma0 and n
|
|
0.05539 1.224
|
|
|
|
|
|
#PS !---Vapor pressure---
|
|
PS5 !Vapor pressure equation for trans-butene of Cullimore (2010).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Cullimore, I.D., 2010.
|
|
?
|
|
?Functional Form: P=Pc*EXP[SUM(Ni*Theta^ti)*Tc/T] where Theta=1-T/Tc, Tc and Pc
|
|
? are the reducing parameters below, which are followed by rows containing Ni and ti.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
428.61 4027.3 !Reducing parameters
|
|
5 0 0 0 0 0 !Number of terms in equation
|
|
-7.6226 1.0
|
|
7.9421 1.5
|
|
-6.9631 1.65
|
|
-6.5517 4.8
|
|
3.9584 5.3
|
|
|
|
|
|
#DL !---Saturated liquid density---
|
|
DL1 !Saturated liquid density equation for trans-butene of Cullimore (2010).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Cullimore, I.D., 2010.
|
|
?
|
|
?Functional Form: D=Dc*[1+SUM(Ni*Theta^ti)] where Theta=1-T/Tc, Tc and Dc are
|
|
? the reducing parameters below, which are followed by rows containing Ni and ti.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
428.61 4.213 !Reducing parameters
|
|
5 0 0 0 0 0 !Number of terms in equation
|
|
12.452 0.52
|
|
-34.419 0.73
|
|
52.257 0.97
|
|
-42.889 1.24
|
|
15.463 1.50
|
|
|
|
|
|
#DV !---Saturated vapor density---
|
|
DV3 !Saturated vapor density equation for trans-butene of Cullimore (2010).
|
|
?
|
|
?```````````````````````````````````````````````````````````````````````````````
|
|
?Cullimore, I.D., 2010.
|
|
?
|
|
?Functional Form: D=Dc*EXP[SUM(Ni*Theta^ti)] where Theta=1-T/Tc, Tc and Dc are
|
|
? the reducing parameters below, which are followed by rows containing Ni and ti.
|
|
?
|
|
!```````````````````````````````````````````````````````````````````````````````
|
|
0. !
|
|
10000. !
|
|
0. !
|
|
0. !
|
|
428.61 4.213 !Reducing parameters
|
|
6 0 0 0 0 0 !Number of terms in equation
|
|
-3.1276 0.412
|
|
-6.0548 1.24
|
|
-18.243 3.2
|
|
-60.842 7.0
|
|
135.95 10.0
|
|
-182.70 11.0
|
|
|
|
|
|
@END
|
|
c 1 2 3 4 5 6 7 8
|
|
c2345678901234567890123456789012345678901234567890123456789012345678901234567890
|